Internet-Draft STIR Certs OCSP March 2024
Peterson & Turner Expires 18 September 2024 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-ietf-stir-certificates-ocsp-07
Published:
Intended Status:
Standards Track
Expires:
Authors:
J. Peterson
Neustar
S. Turner
sn3rd

OCSP Usage for Secure Telephone Identity Certificates

Abstract

When certificates are used as credentials to attest the assignment or ownership of telephone numbers, some mechanism is required to convey certificate freshness to relying parties. Certififcate Revocation Lists (CRLs) are commonly used for this purpose, but for certain classes of certificates, including delegate certificates conveying their scope of authority by-reference in Secure Telephone Identity Revisited (STIR) systems, they may not be aligned with the needs of relying parties. This document specifies the use of the Online Certificate Status Protocol (OCSP) as a means of retrieving real-time status information about such certificates, defining new extensions to compensate for the dynamism of telephone number assignments.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 18 September 2024.

Table of Contents

1. Introduction

The STIR problem statement [RFC7340] discusses many attacks on the telephone network that are enabled by impersonation, including various forms of robocalling, voicemail hacking, and swatting. One of the most important components of a system to prevent impersonation is the implementation of credentials which identify the parties who control telephone numbers. The STIR certificates [RFC8226] specification describes a credential system based on [X.509] version 3 certificates in accordance with [RFC5280] for that purpose. Those credentials can then be used by STIR authentication services [RFC8224] to sign PASSporT objects [RFC8225] carried in a SIP [RFC3261] request.

[RFC8226] specifies an extension to X.509 that defines a Telephony Number (TN) Authorization List that may be included by certificate authorities in certificates. This extension provides additional information that relying parties can use when validating transactions with the certificate. When a SIP request, for example, arrives at a terminating administrative domain, the calling number attested by the SIP request can be compared to the TN Authorization List of the certificate that signed the request to determine if the caller is authorized to use that calling number in SIP.

No specific recommendation is made in [RFC8226] for a means of determining the freshness of certificates with a TN Authorization List. Moreover, there is significant dynamism in telephone number assignment, and due to practices like number portability, information about number assignment can suddenly become stale. This problem is especially pronounced when a TN Authorization List extension associates a large block of telephone numbers with a certificate, as relying parties need a way to learn if any one of those telephone numbers has been ported to a different administrative entity. To facilitate this, [RFC8226] Section 10.1 specifies a way that the TN Authorization List can be shared by-reference in a certificate, via a URL in the Authority Information Access extension, so that a more dynamic list can be maintained without continually reissuing the certificate. For very large and/or complex TN Authorization Lists, however, this could require relying parties to redownload the entire list virtually every time they process a call. Moreover, some certificate holders may be reluctant to share the entire list of telephone numbers associated with a certificate in cases where a relying party only needs to know, effectively, whether a single number (the calling party number for a particular call) is in the scope of authority for a certificate or not. This document explores approaches to real-time status information for such certificates, and recommends an approach.

2. Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

3. Overview of Certificate Verification Methods

For traditional certificate status information, there are three common certificate verification mechanisms employed by CAs:

  1. Certificate Revocation Lists (CRLs) [RFC5280] (and [RFC6818])

  2. Online Certificate Status Protocol (OCSP) [RFC6960], and

  3. Server-based Certificate Validation Protocol (SCVP) [RFC5055].

Verifiers relying on status information need a way to obtain it - that is, where to locate it. Placing the location of the status information in the certificate makes the certificate larger, but it eases the client workload. The CRL Distribution Point certificate extension includes the location of the CRL and the Authority Information Access certificate extension includes the location of OCSP and/or SCVP servers; both of these extensions are defined in [RFC5280]. In all cases, the status information location is provided in the form of an URI.

CRLs are an attractive solution because they are supported by traditional web PKI environments. CRLs have a reputation of being quite large (10s of MBytes), because CAs maintain and issue one monolithic CRL with all of their revoked certificates, but CRLs do support a variety of mechanisms to scope the size of the CRLs: based on revocation reasons (e.g., key compromise vs CA compromise), user certificates only, and CA certificates only as well as just operationally deciding to keep the CRLs small. However, scoping the CRL introduces other issues (i.e., does the relying party have all of the CRL partitions). In practice, CRLs are widely used in STIR environments, often through a federated approach where a community of trusted CAs pool their CRLs for distribution from a central point.

CAs in the STIR architecture thus have already implemented CRLs, largely for audit purposes rather than real-time status information. The need for these CRLs is not likely to go away, especially for the case of service providers whose certificates are based on Service Provider Codes (SPCs). For delegate STIR certificates ([RFC9060]), however, especially those with TN Authorization Lists based on telephone numbers, OCSP may provide an important optimizations. Between the OCSP and SCVP, OCSP is much more widely deployed and this document therefore RECOMMENDS the use of OCSP in high-volume environments (HVE) for validating the freshness of telephone-number based certificates, based on [RFC6960], incorporating some (but not all) of the optimizations of [RFC5019].

Like most PKIX-developed protocols, OCSP is extensible; OCSP supports request extensions (including sending multiple requests at once) and per-request extensions. As the relying party in STIR is validating a PASSporT associated with a telephone call, it is unlikely that the verifier will request authorization checks on multiple telephone numbers in one request, so a per-request extension is what is needed.

OCSP requires an additional round-trip request and response from the verification service to the OCSP responder, and the telephony applications are delay sensitive. Thus, this document also specifies a means to incorporate an OCSP staple into the PASSporT object below (in Section 5).

4. Using OCSP with TN Authorization Lists

Certificates compliant with this specification SHOULD include a URL [RFC3986] pointing to an OCSP service in the Authority Information Access (AIA) certificate extension, via the "id-ad-ocsp" accessMethod specified in [RFC5280]. This can appear in addition to, or as an alternative to, the "id-ad-stirTNList" accessMethod specified in [RFC8226]. It is RECOMMENDED that entities that issue certificates with the Telephone Number Authorization List certificate extension run an OCSP server for this purpose. Baseline OCSP however supports only three possible response values: good, revoked, or unknown. Without some extension, OCSP would not indicate whether the certificate is authorized for a particular telephone number that the verifier is validating.

Consulting OCSP in real time results in a network round-trip delay, which is something to consider because it will add to the call setup time. OCSP server implementations commonly pre-generate responses, and to speed up HTTPS connections, servers often provide OCSP responses for each certificate in their hierarchy. If possible, both of these OCSP concepts should be adopted for use with STIR.

4.1. OCSP Extension Specification

The extension mechanism for OCSP follows X.509 v3 certificate extensions, and thus requires an OID, a criticality flag, and ASN.1 syntax as defined by the OID. The criticality specified here is optional: per [RFC6960] Section 4.4, support for all OCSP extensions is optional. If the OCSP server does not understand the requested extension, it will still provide the baseline validation of the certificate itself. Moreover, in practical STIR deployments, the issuer of the certificate will set the accessLocation for the OCSP AIA extension to point to an OCSP service that supports this extension, so the risk of interoperability failure due to lack of support for this extension is minimal.

The OCSP TNQuery extension is included as one of the request's singleRequestExtensions; it carries the telephone number for which the query is being performed, typically the telephone number in the "orig" field of a PASSporT being validated. The TNQuery extension may also appear in the response's singleExtensions; when an OCSP server includes a telephone number in the response's singleExtensions, this informs the client that the certificate is still valid for the number that appears in the TNQuery extension field. If the TNQuery is absent from a response to a query containing a TNQuery in its singleRequestExtension, then the server is not able to validate that the number is still in the scope of authority of the certificate.

  id-pkix-ocsp-stir-tn  OBJECT IDENTIFIER ::= { id-pkix-ocsp 10 }

  TNQuery ::= TelephoneNumber

The HVE OCSP profile [RFC5019] prohibits the use of per-request extensions. As it is anticipated that STIR will use OCSP in a high-volume environment, many of the optimizations recommended by HVE are desirable for the STIR environment. This document therefore uses the HVE optimizations augmented as follows:

  • Implementations MUST use SHA-256 as the hashing algorithm for the CertID.issuerNameHash and the CertID.issuerKeyHash values. That is CertID.hashAlgorithm is id-sha256 [RFC4055] and the values are truncated to 160-bits as specified Option 1 in Section 2 of [RFC7093].

  • Clients MUST include the OCSP TNQuery extension in requests' singleRequestExtensions.

  • Servers MUST include the OCSP TNQuery extension in responses' singleExtensions.

  • Servers SHOULD return responses that would otherwise have been "unknown" as "not good" (i.e., return only "good" and "not good" responses).

  • Clients MUST treat returned "unknown" responses as "not good".

  • If the server uses ResponderID, it MUST generate the KeyHash using SHA-256 and truncate the value to 160-bits as specified in Option 1 in Section 2 of [RFC7093].

  • Implementations MUST support ECDSA using P-256 and SHA-256. Note that [RFC6960] requires RSA with SHA-256 be supported.

  • This removes the requirement to support SHA-1, RSA with SHA-1, or DSA with SHA-1.

OCSP responses MUST be signed using the same algorithm as the certificate being checked.

To facilitate matching the authority key identifier values found in CA certificates with the KeyHash used in the OCSP response, certificates compliant with this specification MUST generate authority key identifiers and subject key identifiers using the SHA-256 and truncate the value to 160-bits as specified in Option 1 in Section 2 of [RFC7093].

Ideally, once a certificate has been acquired by a verifier, some sort of asynchronous mechanism could notify and update the verifier if the scope of the certificate changes so that verifiers could implement a cache. While not all possible categories of verifiers could implement such behavior, some sort of event-driven notification of certificate status is another potential subject of future work. One potential direction is that a future SIP SUBSCRIBE/NOTIFY-based accessMethod for AIA might be defined (which would also be applicable to the method described in the following section) by some future specification.

4.2. Example OCSP Request

OCSP Request: PEM:

MIGHMIGEMEEwPzA9MAkGBSsOAwIaBQAEFLdmsxX0LkOSjTdofXdwRl6mmDfCBBSS
pHUspJ6+gUTrefyKxZWl6xB1cwIENd70z6I/MD0wHwYJKwYBBQUHMAECBBIEEGN0
k6Ihb0QokYQs01/+t0AwGgYJKwYBBQUHMAEKBA0WCzEyMDI1NTUxMjEy

4.3. Example OCSP Response

OCSP Response: PEM:
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4.4. STIR Certification Authorities and OCSP

In a STIR deployment, certification authorities will typically be the entities that operate OCSP servers. Ultimately, the OCSP response MUST be signed by a CA in the certification chain of the end entitiy certificate that signed the PASSporT being verified. In the case of multilevel certificate delegation (i.e. [RFC9060]), this means the OCSP response may be signed by any of the parent "encompassing" certificates of the end entity delegate certificate in question.

5. Approaches to OCSP Stapling

At a high level, there are a number of potential solutions that could mitigate the round-trip time incurred on the verification service side to perform OCSP validation.

A verification service validating a PASSporT acquires the certificate referenced by its "x5u" header element, if that certificate is not cached. Typically, that acquisition happens by derefencing the URI in the value of the "x5u" element. One could design an system where OCSP validation is piggybacked onto that network fetch. This solution is however not optimal for cases where signing certificates are long-lived and cached, so that queries will otherwise be very infrequent. Requiring certificate fetches every time a new telephone number is seen at the verification service would likely incur roughly the same number of round trips as the [I-D.peterson-stir-certificates-shortlived] mechanism.

There are also variants of the "x5u" approach that sidestep OCSP entirely, by decorating the "x5u" URI with query parameters that incorporate the calling telephone number. As the authentication service necessarily knows the telephone number from the "orig" field, and controls the contents of "x5u", it has the means to decorate the URI appropriately during PASSporT creation. The certificate repository (i.e. HTTP service) receiving a certificate fetch with a decorated URI could could then verify that the calling number is currently in the scope of the requested certificate - if it is not, the service could then fail to return a certificate, preventing the verification service from validating. However, like the approach above, this would have implications for certificate fetch frequency similar to short-lived certs, as the decorated URIs would be governed by HTTP caching mechanics.

Thus, the solution proposed here is that the authentication service instead inserts a new PASSporT payload element, "stpl", which has as its value an OCSP staple compliant with the STIR extension defined in Section 4.1. Such staples can either be pre-generated ([RFC6960] Section 2.5) and published regularly to the authentication service, or the authentication service can query for a staple on a per-call basis. Note that OCSP for STIR does furnish a response concerning only a single telephone number, and thus if a certificate can sign for a large number range, one pre-generated staple would need to be furnished to the authentication service for each telephone number that could potentially originate a call. Generating OCSP staples on the fly may however cause a round-trip time delay of its own, which depending on how the authentication service and the certificate authority are connected, could effectively incur the same delay as an OCSP dip from the verification service.

One alternative design would be to carry an OCSP staple at the SIP layer, in a body or header. But the because PASSporT can be used in non-SIP environments, and this OCSP extension is specific to certificates that use the TNAuthList extension, embedding the staple in the PASSporT is a superior choice. While encoding and embedding an OCSP response will increase the size of the PASSporT, that overall increase in SIP message size will ideally be the same as if the response had been placed in a separate header.

Finally, it could be argued that the round-trip delay incurred at the verification service is not actually problematic, as there is a fungible delay on the terminating side during which ringing can be played to the caller without commencing alerting on the end-user called device. But Section 7 also describes the potential privacy implications of revealing to the OCSP responder the verification service that has received a call for a particular calling number. On balance, stapling at the authentication service, especially pre-generated stapling, seems to offer the best all-around solution for using OCSP with STIR.

5.1. OCSP Staple PASSporT Element

The header of a PASSporT with an OCSP staple follows baseline [RFC8225]; no new PASSporT Type is required for transmission of staples.

{ "typ":"passport",
  "alg":"ES256",
  "x5u":"https://www.example.com/cert.cer" }

The payload of the PASSporT contains a new payload claim for "stpl". This is a base64 encoded representation of an OCSP response that the STIR authentication service receives from a CA, either asynchronously (prefetched) or synchronously after querying the CA when a call signed by the certificate in the "x5u" value specified in the header has arrived.

   { "orig":{"tn":"12155551212"},
     "dest":{"tn":["12155551214"]},
     "iat":1443208345
         "stpl":"MIIE2QoBAKCCBNIwggTOBgkrBgEFBQcwAQEEggS/MIIEuzCCASuhgYAwfjELMAkG
     A1UEBhMCQVUxEzARBgNVBAgTClNvbWUtU3RhdGUxITAfBgNVBAoTGEludGVybmV0
     IFdpZGdpdHMgUHR5IEx0ZDEVMBMGA1UEAxMMc25tcGxhYnMuY29tMSAwHgYJKoZI
     hvcNAQkBFhFpbmZvQHNubXBsYWJzLmNvbRgPMjAyNDAzMTcwNTA5MDBaMFQwUjA9
     MAkGBSsOAwIaBQAEFLdmsxX0LkOSjTdofXdwRl6mmDfCBBSSpHUspJ6+gUTrefyK
     xZWl6xB1cwIENd70z4IAGA8yMDEyMDQxMTE0MDkyMlqhPzA9MB8GCSsGAQUFBzAB
     AgQSBBBjdJOiIW9EKJGELNNf/rdAMBoGCSsGAQUFBzABCgQNFgsxMjAyNTU1MTIx
     MjANBgkqhkiG9w0BAQUFAAOBgQA5O6EYgsuHsNbtDedkC0RaVvrXW9DX5Fdl8rvh
     woSok04WT6/WV2pSIJCdcNwQJ84WwdCV/86uz3/MhM/zq0OBhh+x8g91YD5DLvie
     iNwNgJ/m1EKPfQJgm2ef7Uh7Q2EDELd4jW79X5NMrw5oe1HSrl1DUsiXR3oNu3TD
     cuJPAKCCAvUwggLxMIIC7TCCAlagAwIBAgIBATANBgkqhkiG9w0BAQUFADB+MQsw
     CQYDVQQGEwJBVTETMBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJu
     ZXQgV2lkZ2l0cyBQdHkgTHRkMRUwEwYDVQQDEwxzbm1wbGFicy5jb20xIDAeBgkq
     hkiG9w0BCQEWEWluZm9Ac25tcGxhYnMuY29tMB4XDTEyMDQxMTEzMjUzNVoXDTEz
     MDQxMTEzMjUzNVowfjELMAkGA1UEBhMCQVUxEzARBgNVBAgTClNvbWUtU3RhdGUx
     ITAfBgNVBAoTGEludGVybmV0IFdpZGdpdHMgUHR5IEx0ZDEVMBMGA1UEAxMMc25t
     cGxhYnMuY29tMSAwHgYJKoZIhvcNAQkBFhFpbmZvQHNubXBsYWJzLmNvbTCBnzAN
     BgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEAww1ORzpzVfCNgqI8QfIpSFkR2ELmgI54
     6xEzDqa6LgxxV58FqkKPyN5tG12JqHK4fZA3n2/nIHO/niSrwLwaq6l0Z1N/A5kF
     P84cqQn7Rhnz/MY7gWdZ9t5Ud4aZTdcmANCdl0oAWgIOnvDrCn9b3F/BLNPaw6PJ
     kKbeBts0eesCAwEAAaN7MHkwCQYDVR0TBAIwADAsBglghkgBhvhCAQ0EHxYdT3Bl
     blNTTCBHZW5lcmF0ZWQgQ2VydGlmaWNhdGUwHQYDVR0OBBYEFPGLNnaSRSzB5cmO
     ew+ATZpapxHGMB8GA1UdIwQYMBaAFPGLNnaSRSzB5cmOew+ATZpapxHGMA0GCSqG
     SIb3DQEBBQUAA4GBAFkdLhSVZUCHeoVaVG4FxU6csLTYrTVxYmGJEUb++zHEiaiw
     mv3NcJ7i5qnBXLkVCtKDevGSQz9hwwynvDAmfPrMfgheeHjPFQoDfbkPV8hO8fV6
     1w3d1MPUSVWlkiHs5DSjXgRNJQzNo1IwuBwBEnX+53m89cLagDlxNY1hf8vI"
         }

6. IANA Considerations

6.1. TN-HVE OCSP Extension

This document makes use of object identifiers for the TN-HVE OCSP extension in Section 4.1 and the ASN.1 module identifier defined in Appendix A. It therefore requests that the IANA make the following assignments:

TN-OCSP-Module-2016 OID in the SMI Security for PKIX Module Identifier registry: https://www.iana.org/assignments/smi-numbers/smi- numbers.xhtml#smi-numbers-1.3.6.1.5.5.7.0

TN-HVE OCSP extension in the SMI Security for PKIX Online Certificate Status Protocol (OCSP) registry: 1.3.6.1.5.5.7.48.1.10.

6.2. 'stpl' JSON Web Token Claim

This specification requests that the IANA add one new claim to the JSON Web Token Claims registry as defined in [RFC7519].

Claim Name: "stpl"

Claim Description: OCSP Staple

Change Controller: IESG

Specification Document(s): [RFCThis]

7. Privacy Considerations

Querying for real-time status information about certificates can allow parties monitoring communications to gather information about relying parties and the originators of communications. Unfortunately, the TNQuery extension adds a new field that could potentailly be monitored by OCSP eavesdroppers: the calling telephone number provides a specific piece of additional data about the originator of communications. Using OCSP over TLS is one potential countermeasure to this threat, as described in [RFC6960] Appendix A.1.

Preventing eavesdropping reduces on potential privacy leak, though of course using OCSP reveals to the OCSP service (likely acting for the certification authority) the verification service where calls from a given telephone number are terminating. Bear in mind that STIR assumes that verification services use HTTPS to acquire certificates (by referencing the "x5u" field of the PASSporT) already, so some connection between the verification service and a certificate repository (likely acting for the certification authority or authentication service) is unavoidable. This OCSP extension further reveals the calling telephone number as it arrives at the verification service to the OCSP service.

One way to mitigate leaking information about relying parties is to use OCSP stapling (see Section 5).

8. Security Considerations

This document is entirely about security. For further information on certificate security and practices, see [RFC5280], in particular its Security Considerations. For OCSP-related security considerations see [RFC6960] and [RFC5019].

9. Acknowledgments

Stephen Farrell provided key input to the discussions leading to this document. Russ Housley provided some direct assistance and text surrounding the ASN.1 module, and with the OCSP request and staple example.

10. References

10.1. Normative References

[I-D.peterson-stir-certificates-shortlived]
Peterson, J., "Short-Lived Certificates for Secure Telephone Identity", Work in Progress, Internet-Draft, draft-peterson-stir-certificates-shortlived-05, , <https://datatracker.ietf.org/doc/html/draft-peterson-stir-certificates-shortlived-05>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
[RFC3261]
Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, DOI 10.17487/RFC3261, , <https://www.rfc-editor.org/info/rfc3261>.
[RFC3986]
Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, , <https://www.rfc-editor.org/info/rfc3986>.
[RFC4055]
Schaad, J., Kaliski, B., and R. Housley, "Additional Algorithms and Identifiers for RSA Cryptography for use in the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 4055, DOI 10.17487/RFC4055, , <https://www.rfc-editor.org/info/rfc4055>.
[RFC5019]
Deacon, A. and R. Hurst, "The Lightweight Online Certificate Status Protocol (OCSP) Profile for High-Volume Environments", RFC 5019, DOI 10.17487/RFC5019, , <https://www.rfc-editor.org/info/rfc5019>.
[RFC5280]
Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, , <https://www.rfc-editor.org/info/rfc5280>.
[RFC5912]
Hoffman, P. and J. Schaad, "New ASN.1 Modules for the Public Key Infrastructure Using X.509 (PKIX)", RFC 5912, DOI 10.17487/RFC5912, , <https://www.rfc-editor.org/info/rfc5912>.
[RFC6818]
Yee, P., "Updates to the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 6818, DOI 10.17487/RFC6818, , <https://www.rfc-editor.org/info/rfc6818>.
[RFC6960]
Santesson, S., Myers, M., Ankney, R., Malpani, A., Galperin, S., and C. Adams, "X.509 Internet Public Key Infrastructure Online Certificate Status Protocol - OCSP", RFC 6960, DOI 10.17487/RFC6960, , <https://www.rfc-editor.org/info/rfc6960>.
[RFC7093]
Turner, S., Kent, S., and J. Manger, "Additional Methods for Generating Key Identifiers Values", RFC 7093, DOI 10.17487/RFC7093, , <https://www.rfc-editor.org/info/rfc7093>.
[RFC7519]
Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, , <https://www.rfc-editor.org/info/rfc7519>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
[RFC8224]
Peterson, J., Jennings, C., Rescorla, E., and C. Wendt, "Authenticated Identity Management in the Session Initiation Protocol (SIP)", RFC 8224, DOI 10.17487/RFC8224, , <https://www.rfc-editor.org/info/rfc8224>.
[RFC8225]
Wendt, C. and J. Peterson, "PASSporT: Personal Assertion Token", RFC 8225, DOI 10.17487/RFC8225, , <https://www.rfc-editor.org/info/rfc8225>.
[RFC8226]
Peterson, J. and S. Turner, "Secure Telephone Identity Credentials: Certificates", RFC 8226, DOI 10.17487/RFC8226, , <https://www.rfc-editor.org/info/rfc8226>.
[RFC9060]
Peterson, J., "Secure Telephone Identity Revisited (STIR) Certificate Delegation", RFC 9060, DOI 10.17487/RFC9060, , <https://www.rfc-editor.org/info/rfc9060>.
[X.509]
ITU-T Recommendation X.509 (10/2012) | ISO/IEC 9594-8, "Information technology - Open Systems Interconnection - The Directory: Public-key and attribute certificate frameworks", .
[X.680]
ITU-T Recommendation X.680 (08/2015) | ISO/IEC 8824-1, "Information Technology - Abstract Syntax Notation One: Specification of basic notation".
[X.681]
ITU-T Recommendation X.681 (08/2015) | ISO/IEC 8824-2, "Information Technology - Abstract Syntax Notation One: Information Object Specification".
[X.682]
ITU-T Recommendation X.682 (08/2015) | ISO/IEC 8824-2, "Information Technology - Abstract Syntax Notation One: Constraint Specification".
[X.683]
ITU-T Recommendation X.683 (08/2015) | ISO/IEC 8824-3, "Information Technology - Abstract Syntax Notation One: Parameterization of ASN.1 Specifications".

10.2. Informative References

[RFC5055]
Freeman, T., Housley, R., Malpani, A., Cooper, D., and W. Polk, "Server-Based Certificate Validation Protocol (SCVP)", RFC 5055, DOI 10.17487/RFC5055, , <https://www.rfc-editor.org/info/rfc5055>.
[RFC6961]
Pettersen, Y., "The Transport Layer Security (TLS) Multiple Certificate Status Request Extension", RFC 6961, DOI 10.17487/RFC6961, , <https://www.rfc-editor.org/info/rfc6961>.
[RFC7340]
Peterson, J., Schulzrinne, H., and H. Tschofenig, "Secure Telephone Identity Problem Statement and Requirements", RFC 7340, DOI 10.17487/RFC7340, , <https://www.rfc-editor.org/info/rfc7340>.

Appendix A. ASN.1 Module

This appendix provides the normative ASN.1 [X.680] definitions for the structures described in this specification using ASN.1, as defined in [X.680] through [X.683].

The modules defined in this document are compatible with the most current ASN.1 specification published in 2015 (see [X.680], [X.681], [X.682], [X.683]). None of the newly defined tokens in the 2008 ASN.1 (DATE, DATE-TIME, DURATION, NOT-A-NUMBER, OID-IRI, RELATIVE-OID-IRI, TIME, TIME-OF-DAY)) are currently used in any of the ASN.1 specifications referred to here.

This ASN.1 module imports ASN.1 from [RFC5912] and [RFC8226].


TN-OCSP-Module-2023
   { iso(1) identified-organization(3) dod(6) internet(1)
     security(5) mechanisms(5) pkix(7) id-mod(0)
     id-mod-tn-ocsp-module-2023(TBD) }

 DEFINITIONS EXPLICIT TAGS ::= BEGIN

 IMPORTS

 id-ad-ocsp
   FROM PKIX1Explicit-2009  -- From RFC 5912
     { iso(1) identified-organization(3) dod(6) internet(1) security(5)
       mechanisms(5) pkix(7) id-mod(0) id-mod-pkix1-explicit-02(51) }

 EXTENSION
   FROM PKIX-CommonTypes-2009  -- From RFC 5912
     { iso(1) identified-organization(3) dod(6) internet(1) security(5)
       mechanisms(5) pkix(7) id-mod(0) id-mod-pkixCommon-02(57) }

 TelephoneNumber
   FROM TN-Module-2016  -- From RFC 8226
     { iso(1) identified-organization(3) dod(6) internet(1) security(5)
       mechanisms(5) pkix(7) id-mod(0) id-mod-tn-module(89) }
 ;

 id-pkix-ocsp OBJECT IDENTIFIER ::= id-ad-ocsp

 --
 -- Telephone Number Query OCSP Extension
 --

 ext-ocsp-tn-query  EXTENSION ::= {
   SYNTAX TNQuery IDENTIFIED BY id-pkix-ocsp-stir-tn }

 TNQuery ::= TelephoneNumber

 id-pkix-ocsp-stir-tn OBJECT IDENTIFIER ::= { id-pkix-ocsp 10 }

 END

Authors' Addresses

Jon Peterson
Neustar, Inc.
Sean Turner
sn3rd