airGRiwrm 0.7.0

Breaking changes:

• CreateSupervisor [Breaking change]: Only allow to apply a command on DirectInjection and Diversion nodes (#101)
• CreateInputsModel [Breaking change]: do not allow to use Qobs on nodes other than Direct Injection and Diversion (#99)

New features:

• Handle simple in-line reservoir inside the model (#51)
• Use of non gauged stations in the network (#42)
• RunModel.Supervision: handle NA values on injected flows (#94)
• Add checks on Supervisor functions (#102)
• Get plot.Qm3s available as a function (#104)
• Implementation of “Diversion” node (#95)
• CreateInputsModel: downgrade error on “Qobs only for nodes Direct Injection and Diversion” to warning (#109)
• Diversion: Remove error “The downstream node of a Diversion node must be different than the downstream node of the node is attached to” (#111)
• Ungauged node: allow to define donor manually (#129)
• Ungauged node - CreateGRiwrm: Search donor through Diversion if not available by natural network (#132)
• Highlight the water deficit at a node due to too much withdrawals (#144)
• Integration of reservoirs as nodes in the network (#90)
• Handle direct withdrawal in reservoirs (#147)
• plot.GRiwrm: use web service instead of DiagrammeR::mermaid (#150)
• plot.GRiwrm: sketch ungauged cluster with subgraphs (#151)
• Implementation of non gauged station with donor other than a downstream gauged station (#92)
• CreateInputsCrit: allow a priori node not only at upstream (#156)
• Allow Diversion on Reservoir (#146)
• CreateInputsModel: deprecate Qobs parameter and use Qinf instead (#120)
• CreateInputsModel: Specify the error message: “‘Qobs’ column names must be included in ’id’s of the GRiwrm object” (#152)
• plot.GRiwrmOutputsModel: handle other units than mm / time step (#105)
• Feature request: function for getting parameters from GRiwrmOutputsCalib (#86)
• Speed up RunModel_Lag for RunModel.Supervisor (#164)
• plot.GRiwrm: allow to use optional parameters of mermaid function (#160)
• Ungauged node cluster: improve outsider gauged node detection (#168)

Bug fixes:

• Wrong file name for the “Get started” vignette (#79)
• CreateInputsCrit: wrong id in error message (#85)
• ConvertMeteoSD: crash with upstream nodes with no area (#89)
• Regularisation: check if current node and a priori node use the same model (#93)
• Regularisation: taking into account X4 transformation (#88)
• RunModel.Supervisor doesn’t work with Diversion node (#106)
• Allow to use node with model RunModel_Lag (#107)
• Calibration does not work when upstream catchments are both gauged and ungauged (#108)
• Ungauged node: incorrect definition of donor with Reservoir and bug with Diversion nodes (#110)
• Ungauged node: crash with upstream Diversion node (#113)
• Ungauged node: crash on diversion to node outside the sub-network (#112)
• Ungauged node: difference of ErrorCrit between Calibration and RunModel (#115)
• getSD_Ids crashes on upstream nodes with Diversion (#116)
• CreateSupervisor: wrong definition of allowed nodes for command (#117)
• Calibration: Diversion is not handled on upstream nodes (#122)
• Calibration: crash with ungauged node and multiple Diversions (#123)
• CreateInputsModel: wrong area of sub-basin with upstream Reservoir, Lag or Direct Injection nodes (#124)
• RunModel.Supervisor: error with Diversion node (#126)
• Ungauged node: Diversions are not handled correctly in Calibration (#127)
• Calibration: crash with a diverted ungauged node (#128)
• Ungauged nodes: X4 transformation not handled with CemaNeige models (#135)
• Crash with Hysteresis in CemaNeige (#134)
• Ungauged nodes: crash with a reservoir and several upstream nodes (#136)
• Ungauged node: Diversion to Reservoir crashes Calibration (#130)
• Wrong calibration node order with multiple ungauged node clusters (#149)
• CreateGRiwrm: several Diversions on the same node do not raise error (#125)
• Reservoir output plot color palette issue (#154)
• Wrong sorting for calibration of ungauged nodes (#155)
• Donor defined on gauged model node turns the node into ungauged at Calibration (#157)
• Calibration: crash when transferring from upstream donor to upstream receiver (#158)
• plot.GRiwrm crashes with a single node (#153)
• CreateInputsModel: Don’t allow ungauged donor (#131)
• Rename internal function RunModel.SD (#166)
• Calibration: crash with downstream receiver node with upstream reservoir (#167)

Documentation:

• Improve Supervisor documentation (#100)
• Update package citation reference (#119)
• Add a main page in the package documentation (#77)
• Improve RunModel documentation (#133)

Internal changes:

• Check failed on release version (#78)
• Transfer documentation to github pages (#148)
• Publish documentation package on github with github workflow (#162)
• CI: add check with version “dev” of airGR (#84)

airGRiwrm 0.6.2

• airGR changes cause failed check (#139)

airGRiwrm 0.6.1

Changes:

• Simplify the use of airGR in airGRiwrm (#63)
• CreateInputsModel: Make Qobs parameter optional (#60)
• airGR compatibility: change on LengthHydro unit (#32)
• CreateInputsCrit: Change obs parameter characteristics (#38)
• Update URLs in the DESCRIPTION file (#45)
• Use S3 plot method for GRiwrm class objects (#26)
• Rename function GRiwrm to CreateGRiwrm (#46)
• CreateInputsCrit: transfo is mandatory for parameter regularization (#56)

New features:

• plot.Qm3s: customize legend position (#75)
• Regularisation: Add default value for parameter Celerity (#58)
• Add network consistency checks in GRiwrm (#36)
• Handle CemaNeige compatibility (#52)
• Use S3 plot method for GRiwrmOutputsModel class objects (#26)
• Handling correctly initial conditions (#48)
• Calibration with parameter regularization (#54)

Bug fixes:

• Results differences between versions on vignette V04 (#75)
• plot.GRiwrm not working in gitlab-ci (#74)
• plot.GRiwrm: mermaid code is displayed with the diagram (#73)
• CreateGRiwrm crashes when keeping all columns and rename some (#64)
• Breaking change in airGR in issue HYCAR-Hydro/airgr#137 (#62)
• Review documentation for publication on CRAN (#43)
• Vignettes: working directory instability (#35)
• airGR compatibility: debugged version of RunModel_Lag (#33)
• CreateInputsModel: Error when using data.frame for Qobs (#37)
• RunModel.Supervisor: Error in ctrlr\(U[seq.int(length(sv\)ts.index), i] (#39)
• Supervisor: measurement on network downstream node returns NULL (#40)
• RunModel: Suspected bug on OutputsModel$Qsim in the training example (#41)
• Test fail after airGR update on outputting warm-up Qsim (#50)
• Wrong Qobs use in Lavenne function criteria (#57)

Internal changes:

• Prepare the package for v0.6.x CRAN submission (#71)
• Clone on github master and dev branches of the repository (#68)
• Update airGR dependency to CRAN v1.7.0 (#69)
• Add an airGR galaxy tab on the website? (#49)
• CI: dependency issues with Latex in Check as CRAN (#53)
• Remove dependency to R > 3.5 (#59)
• pkgdown: wrong documentation for methods CreateRunOptions and CreateCalibOptions (#65)
• Review documentation for publication on CRAN (#43)
• Push roxygen outputs on the repository (#34)
• Generation of the https://airgriwrm.g-eau.net site documentation (#44)
• Automatically update website from package repository (#47)

airGRiwrm 0.5.0 (Release date: 2021-03-07)

New features:

• Feedback control (#19)
• RunModel of GRiwrm networks: add a data.frame of simulated flows in OutputsModel (#30)
• Plot simulated flows of all the nodes in m3/s (#31)

Changes:

• RunModel: Uncoupling of hydrological and hydraulic models (#28)

airGRiwrm 0.4.0 (Release date: 2020-12-28)

New features:

• Convert basin meteorological data to sub-basin level (#21)

Changes:

• Clarify dependency with ‘DiagrammeR’ package (#24)

Minor changes:

• Replace vignette examples on Seine River by a fake example from data provided by airGR (#13)

Bug fixes:

• Impossibility to inject flow associated to an area (#23)
• Error in the area used for the sub basins (#22)

airGRiwrm 0.3.1 (Release date: 2020-08-07)

New features:

• Calibration of influenced semi-distributed model (#11)

airGRiwrm 0.3.0 (Release date: 2020-08-07)

New features:

• Add node of type “direct flow” in order to inject or withdraw flows into the model (#5)

airGRiwrm 0.2.1 (Release date: 2020-06-11)

Changes:

• Remove Gits class object and use CreateInputsModel directly (#7)
• Remove Girop class object and integrate hydrological model and area in Ginet (#9)
• Rename “Ginet” class object to “Griwrm” (#10)

airGRiwrm 0.2.0 (Release date: 2020-06-06)

New features:

• Calibration of semi-distributed model (#3)

airGRiwrm 0.1.0 (Release date: 2020-05-25)

New features:

• Database structuring (#1)
• Scheduling airGR model runs (#2)