Basic theory and concepts

Life history models and projection matrices

Matrix projection models (MPMs) are representations of the dynamics of a population across all life history stages deemed relevant, across the most relevant time interval (typically one year, and assumed to be consistent within each analysis). They require a complete model of the organism’s life history prior to construction, and this model must explicitly describe all life stages and all life history transitions to be modeled. Each stage is mutually exclusive, meaning that an individual can only be in a single stage at a given time. Each stage is represented in the matrix by a single column and a single row. Each transition takes exactly one full time step, which needs to be defined consistently and should be equivalent to the approximate amount of time between consecutive monitoring occasions. Matrix elements (\(a_{kj}\)) show either the probability of transition for an individual in stage \(j\) at occasion t (along the columns), to stage \(k\) at occasion t+1 (along the rows), or the mean rate of production of new recruits into stage \(k\) at occasion t+1 (along the rows) by individuals in reproductive stage \(j\) in occasion t (along the columns). Conceptually, each individual is in a particular stage in the instance of monitoring or observation, and then either dies or completes a transition in the interval between that occasion’s observation and the next occasion’s observation. Death is not an explicit life stage and so is not modeled as such, instead becoming a potential endpoint of each transition.

Stages are generally defined under the assumption that they are unique moments in an organism’s life. This uniqueness is assumed to extend to the demography of the organism during its time within that stage. In some cases, stages are defined as developmental stages, as happens with insect instars. In other cases, stages are defined almost purely on the basis of size, as occurs with perennial herbs that may exhibit a different number of stems, leaves, and flowers in each growing season. In still other cases, stages may be defined via other characteristics. For example, the vegetative dormancy stage of some perennial herbs is defined by a lack of aboveground size, and so is characteristically not observable (Shefferson et al. 2001). In still other cases, age may also fall into a stage’s definition, as may the maturity status, observability, etc.

The timing of monitoring relative to the reproductive season impacts the structure of life history models. Life history models are typically categorized as either pre-breeding or post-breeding. Here, “breeding” refers to the production of offspring, and so a pre-breeding model assumes that monitoring is conducted immediately before the new recruits are born, while a post-breeding model assumes that the monitoring is conducted just after new recruits are born (in both cases, breeding is assumed to be seasonal). In a pre-breeding model, fecundity equals the production of newborns multiplied by the survival of newborns to age 1, since fecundity must take place over a full time step and the timing of the census misses both the birth event itself and the time in which the organism is a newborn (Kendall et al. 2019). In a post-breeding model, fecundity equals the survival of the parent from the stage/age preceding reproduction to reproduction itself, multiplied by the number of newborns produced (Kendall et al. 2019).

In monitoring studies of plant populations, the typical life history model a pre-breeding model, in which fecundity is estimated as the production of seeds in a given year multiplied by their over-winter survival probability as seeds and their germination probability in the following year. If the life history includes seed dormancy, then it is modeled by multiplying seed production by seed survival (which is given as the probability of maintaining seed viability from one year to the next), in the first instance, and then as seed survival for seeds already produced and dormant (seed survival may be modeled to decrease with increasing age of dormant seed). Added complexity can arise if there are multiple fecundity pathways, for example when clonal reproduction is also possible, or if multiple propagule stages exist, or if recruitment can be to seeds that immediately germinate as well as to seeds that are dormant for one or more years. We urge users to be careful with this step, as properly defining the life history model has important implications for all analyses of population dynamics (Kendall et al. 2019).

Figure 1 is a simple example of a stage-based life history model (technically a life cycle graph) and its associated Lefkovitch matrix for a terrestrial orchid species, Cypripedium candidum (Shefferson et al. 2001). Here, we show each stage as a node, and each transition as a uni-directional arrow (a). The rates and probabilities are shown as mathematical symbols in (b), with \(S_{kj}\) denoting survival-transition probability from stage \(j\) in occasion t to stage \(k\) in occasion t+1, and \(F_{kj}\) denoting the fecundity of reproductive stage \(j\) into recruit stage \(k\) in this life history.

Figure 1.1. Simple life history model (a) and ahistorical MPM (b) for Cypripedium candidum, a North American herbaceous plant species. Here, S is the dormant seed stage, J is the seedling stage, D is adult vegetative dormancy, V is adult vegetative sprouting, and F is flowering.

Ahistorical vs. historical matrix models

Figure 1b is an example of an ahistorical MPM (ahMPM), which is a matrix projection model in which the future stage of an individual is dependent only on its current stage, and not on previous stages. In other words, individual history is not incorporated into ahMPMs. It may seem odd that individual history is not incorporated into the matrices given that demographic datasets are composed of records of individual histories spanning several or even many observation events. However, construction of a typical ahMPM breaks up these individual histories into pairs of consecutive stages across time, with each pair treated as independent of every other pair of consecutive stages. For example, if an individual is in stage A in occasion 1, stage B in occasion 2, stage E in occasion 3, and dead in occasion 4, then its individual history is broken up into A-B, B-E, and E-Dead, with each pair assumed to be independent. The resulting projection matrix would be the same if these transitions originated from different individuals or the same one - their order and relationships do not have any impacts in ahMPM construction.

The matrix shown in figure 1.1 can be used to project population dynamics by predicting the future numbers of individuals in each stage. For this example, we can project forward by multiplying the projection matrix by a column vector of the numbers of individuals in each stage, given in the same order as the order of stages corresponding to the rows and columns of the matrix, in a particular time, as in

\[\begin{equation} \tag{1} \left[\begin{array} {rrrrr} n _{2,S} \\ n _{2,J} \\ n _{2,V} \\ n _{2,D} \\ n _{2,F} \end{array}\right] = \left[\begin{array} {rrrrr} S _{SS} & 0 & 0 & 0 & F _{SF} \\ S _{JS} & S _{JJ} & 0 & 0 & F _{JF} \\ 0 & S _{VJ} & S _{VV} & S _{VD} & S _{VF} \\ 0 & S _{DJ} & S _{DV} & S _{DD} & S _{DF} \\ 0 & 0 & S _{FV} & S _{FD} & S _{FF} \end{array}\right] \left[\begin{array} {rrrrr} n _{1,S} \\ n _{1,J} \\ n _{1,V} \\ n _{1,D} \\ n _{1,F} \end{array}\right] \end{equation}\]

where \(n _{1,S}\) is the number of individuals in stage \(S\) in occasion 1. The total population size in any given occasion is the sum of the numbers of individuals in all stages in that occasion. The actual discrete population growth rate is calculated as the ratio of total population size in occasion 2 to the total population size in occasion 1, and the asymptotic growth rate \(\lambda\) can be estimated as the dominant eigenvalue of this matrix.

The independence of consecutive stage-pairs reflects a central assumption in ahMPM analysis: the stage of an individual in the next occasion is influenced only by its current stage. Conceptually, if an organism’s stage in the next occasion is entirely determined by its current stage, then its previous states do not influence these transitions. Thus, standard ahMPMs are two dimensional and reflect only the current and next immediate stage of individuals, given by the columns and rows, respectively. This is ultimately an extension of the iid assumption in statistics - that the states of individuals are independent and originate from identically-distributed random variables.

MPMs have been estimated since the 1940s (Caswell 2001). We have never done a meta-analysis of all of these studies, but nonetheless it is safe to say that studies considering individual history are rare. The typical MPM study uses ahMPMs, and so assumes independence of stage transitions across time even from the same individual. In fact, at the time of writing, we are aware of only five examples of studies breaking these assumptions and using a historical approach, meaning that they incorporated some degree of individual history into matrix estimation and analysis (Ehrlén 2000; Shefferson, Warren II, and Pulliam 2014; Shefferson, Mizuta, and Hutchings 2017; Shefferson et al. 2018; deVries and Caswell 2018).

The historical MPM (hMPM) is an extension of the matrix projection model that incorporates information on one previous occasion into the determination of vital rates. Thus, the expected survival-transition probability of an individual in stage \(j\) at occasion t to stage \(k\) at occasion t+1 depends not only on its stage in occasion t but also on its stage in occasion t-1. Population ecologists considering this problem analytically might be inclined to add an extra dimension to the matrix to deal with this, thus creating a 3d array or cube. However, this is mathematically intractable, with many analyses becoming impossible (deVries and Caswell 2018). Instead, we utilize the approach developed by Ehrlén (2000), in which rows and columns represent life history stages paired in consecutive occasions. Thus, columns now represent the From pair of stages (stage in occasions t and t-1), and rows now represent the To pair of stages (stage in occasions t and t+1), as in Figure 1.2. This model is equivalent to the second-order model proposed by deVries and Caswell (2018), although the latter incorporates more history into transitions involving individuals just born (we explain the difference further in this vignette).

Figure 1.2. Historical MPM for Cypripedium candidum, a North American herbaceous plant.

Here, we can refer to matrix elements as \(a_{kjl}\), where the element represents the rate at which individuals transition to stage \(k\) in occasion t+1 after having been stage \(j\) in occasion t and stage \(l\) in occasion t-1. If \(n_{kjl}\) is the number of individuals making this transition, \(n_{.jl}\) is the total number of individuals in stage \(j\) in occasion t and stage \(l\) in occasion t-1 regardless of stage or even status as alive or dead in occasion t+1, \(m\) is the number of stages in the life history model, and \(d\) is the number of stages plus death in the life history model (so \(d=m+1\)), then we have

\[\begin{equation} \tag{2} a _{kjl} = \frac{n _{kjl}}{n _{.jl}} = \frac{n _{kjl}}{\sum_{i=1}^{d} n _{ijl}} \end{equation}\]

These values can be used to determine the associated elements of matrices in ahistorical MPMs, as follows:

\[\begin{equation} \tag{3} a _{kj} = \frac{\sum_{l=1}^{m} n _{kjl}}{\sum_{l=1}^{m} \sum_{i=1}^{d} n _{ijl}} \end{equation}\]

Note that although one can use the actual numbers of individuals making historical transitions to estimate ahistorical MPMs, one cannot use the matrix elements in a historical MPM to calculate the associated ahistorical MPM elements (and vice versa). Historical transitions must be weighted by the numbers of individuals corresponding to each transition from occasion t to t+1 that were in each previous stage to produce the correct ahistorical matrix element. Historical matrix elements are equal only to the ratios of numbers of individuals in these categories, rather than to the numbers of individuals themselves, and contain no information allowing the inference of the latter.

Historical MPMs can be projected forward in the same way that ahMPMs can. Here we see an example of a projection going forward one time step, using the hMPM shown in figure 1.2.

\[\begin{equation} \tag{4} \tiny \left[\begin{array} {rrrrrrrrrrrrrrrrr} n _{2,SS} \\ n _{2,JS} \\ n _{2,JJ} \\ n _{2,VJ} \\ n _{2,DJ} \\ n _{2,FJ} \\ n _{2,VV} \\ n _{2,DV} \\ n _{2,FV} \\ n _{2,VD} \\ n _{2,DD} \\ n _{2,FD} \\ n _{2,VF} \\ n _{2,DF} \\ n _{2,FF} \\ n _{2,SF} \\ n _{2,JF} \end{array}\right] = \left[\begin{array} {rrrrrrrrrrrrrrrrr} S _{SSS} & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & F _{SSF} & 0 \\ S _{JSS} & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & F _{JSF} & 0 \\ 0 & S _{JJS} & S _{JJJ} & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & F _{JJF} \\ 0 & S _{VJS} & S _{VJJ} & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & F _{VJF} \\ 0 & S _{DJS} & S _{DJJ} & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & F _{DJF} \\ 0 & S _{FJS} & S _{FJJ} & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & F _{FJF} \\ 0 & 0 & 0 & S _{VVJ} & 0 & 0 & S _{VVV} & 0 & 0 & S _{VVD} & 0 & 0 & S _{VVF} & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & S _{DVJ} & 0 & 0 & S _{DVV} & 0 & 0 & S _{DVD} & 0 & 0 & S _{DVF} & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & S _{FVJ} & 0 & 0 & S _{FVV} & 0 & 0 & S _{FVD} & 0 & 0 & S _{FVF} & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & S _{VDJ} & 0 & 0 & S _{VDV} & 0 & 0 & S _{VDD} & 0 & 0 & S _{VDF} & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & S _{DDJ} & 0 & 0 & S _{DDV} & 0 & 0 & S _{DDD} & 0 & 0 & S _{DDF} & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & S _{FDJ} & 0 & 0 & S _{FDV} & 0 & 0 & S _{FDD} & 0 & 0 & S _{FDF} & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & S _{VFV} & 0 & 0 & S _{VFD} & 0 & 0 & S _{VFF} & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & S _{DFV} & 0 & 0 & S _{DFD} & 0 & 0 & S _{DFF} & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & S _{FFV} & 0 & 0 & S _{FFD} & 0 & 0 & S _{FFF} & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & F _{SFJ} & 0 & 0 & F _{SFV} & 0 & 0 & F _{SFD} & 0 & 0 & F _{SFF} & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & F _{JFJ} & 0 & 0 & F _{JFV} & 0 & 0 & F _{JFD} & 0 & 0 & F _{JFF} & 0 & 0 \\ \end{array}\right] \left[\begin{array} {rrrrrrrrrrrrrrrrr} n _{1,SS} \\ n _{1,JS} \\ n _{1,JJ} \\ n _{1,VJ} \\ n _{1,DJ} \\ n _{1,FJ} \\ n _{1,VV} \\ n _{1,DV} \\ n _{1,FV} \\ n _{1,VD} \\ n _{1,DD} \\ n _{1,FD} \\ n _{1,VF} \\ n _{1,DF} \\ n _{1,FF} \\ n _{1,SF} \\ n _{1,JF} \end{array}\right] \end{equation}\]

Here, \(n _{1,SS}\) is the number of individuals that were in stage \(S\) in both occasions 0 and 1, and \(n _{2,DF}\) is the number of individuals that were in stage \(D\) in occasion 2 and stage \(F\) in occasion 1.

Historical MPMs normally require a much larger number of elements to be parameterized than ahMPMs do. Figure 1.2 illustrates this issue, but the function-based matrix analysis in our Cypripedium candidum vignette provides a more realistic example. In that case study, we use a life history with 54 life stages, of which the first is a dormant seed stage, the next four are immature stages, the sixth is adult vegetative dormancy, the next 24 stages are size-classified non-flowering adults, and the final 24 stages are size-classified flowering adults. A life history with 54 stages yields an ahistorical matrix with 54 columns and 54 rows, and so 2,916 elements. A full historical matrix should have \(54 \times 54 = 2,916\) columns and 2,916 rows, consisting of 8,503,056 elements, because the column and row stages represent pairs of stages.

In an ahistorical matrix, the only true zeros will be those elements corresponding to biologically impossible transitions, or, in the raw matrix case, those elements without any individuals taking the respective transition in a given time step. However, most elements in a historical MPM are structural zeros. This happens because transition elements in hMPMs are only estimable if stage at occasion t is equal in the column and row stage pairs. For example, the transition probability between stage A in occasion t-1 and stage B in occasion t (column stage), to stage C in occasion t and stage D in occasion t+1 (row stage) equals 0, because an organism cannot be in both stages B and C in occasion t. Increasing the number of stages in a life history model causes these structural zeros to increase at a faster rate than the rate at which the number of truly estimable elements increases. In fact, if there are \(m\) stages in a life history, yielding \(m^2\) elements in an ahistorical matrix, then although there will be \(m^4\) elements in the historical matrix, only \(m^3\) will be potentially estimable while \((m-1)m^3\) are structural zeros (we say potentially because some of the logically possible transitions may still be biologically impossible, or may have no data to yield values other than 0). Thus, in the Cypripedium candidum example, all 2,916 elements of the ahMPM are potentially estimable (although some are biologically impossible), while only 157,464 of the 8,503,056 elements of the associated hMPM are potentially estimable and the rest are structural zeros.

Raw vs. function-based matrix models, including integral projection models

Matrix projection models, whether historical or ahistorical, can also be categorized as either raw or function-based. The oldest and most common in the literature is the raw MPM, in which transition probabilities in the matrix are estimated by counting all of the individuals alive in a particular stage at occasion t, and dividing that number into the number of individuals from that set that are still alive in each possible stage in occasion t+1 (equations 2 and 3). For example, if 100 individuals are alive in stage D in year 2010, and 20 of these are alive in stage D in year 2011, as are a further 40 in stage V and a further 25 in stage F, then the associated transition probabilities are 0.20, 0.40, and 0.25, respectively. The overall survival probability for stage D is the sum of these transitions, or 0.85.

Methods for estimating fecundity in raw matrices vary. In the Cypripedium candidum vignette, we used counts of the number of fruits produced by each individual in a given year, and multiplied by the mean number of seeds per fruit and the mean germination probability in the next year. This study was conducted as a pre-breeding census - fecundity was estimated using a count of the seeds or other propagules that the plant produces (or a proxy thereof, such as the number of fruits multiplied by the mean number of seeds per fruit) multiplied by the probability of that propagule surviving to the next year in order to make sure that fecundity reflects demographic processes across a full time step (Kendall et al. 2019). In other systems in which offspring may be observed and tracked, counts of actual recruits may be possible, such as in studies of nesting birds, and as in Lathyrus vernus, an herbaceous perennial plant that is the subject of some vignettes included in this package.

In function-based MPMs, matrix elements are populated by kernels that link together functions representing key demographic processes governing each transition. Typically, demographic datasets are analyzed via linear models to estimate demographic parameters such as survival probability, the probability of becoming a certain size assuming survival, and fecundity. These linear models are developed using nested subsets of the demographic data used in a study in order to estimate conditional probabilities reflecting all of the demographic processes that must occur over the span of a single time step. Matrix elements are then estimated as products of responses from these linear models set to particular inputs corresponding to stage at occasion t and occasion t+1, as well as any other parameters governing the construction of the matrix. Function-based MPMs are more recent inventions than raw MPMs, and their strengths are making them increasingly common in the literature.

Easterling, Ellner, and Dixon (2000) proposed a method of analyzing population dynamics called the integral projection model (IPM), which modeled the life history of an organism using a continuous size metric modeled on a Gaussian distribution. At least theoretically, the aim was to produce a model that was not contingent on a stage classification together with a function-based kernel to model population dynamics. In practice, however, size was and is discretized into many fine-scale size classes. The result is that, in practice, IPMs are actually high resolution function-based MPMs, breaking up a life history into many fine-scale size classes using a continuous measure of size and then estimating survival-transitions and fecundity according to these fine-scale size classes (Ellner and Rees 2006). Package lefko3 easily handles the creation and analysis of IPMs. We include a vignette in lefko3 showing an example, and also devote a chapter of the free e-book lefko3: a gentle introduction to the topic.

The example from Figures 1.1 and 1.2 may help to illustrate the procedure of creating a function-based MPM. In Cypripedium candidum, the simple life history model shown in Figure 1 includes one adult stage that is not observable (D - vegetative dormancy), one adult stage that is observable but not reproductive (V - vegetative sprouting), and one adult stage that is both observable and reproductive (F - flowering). If \(\sigma _{.jl}\) is the probability of survival from stage \(j\) in occasion t and stage \(l\) in occasion t-1 to any stage in occasion t+1, \(\rho _{.jl}\) is the probability of sprouting in occasion t+1 after being stage \(j\) in occasion t and stage \(l\) in occasion t-1 and surviving to occasion t+1, and \(\gamma _{.jl}\) is the probability of flowering in occasion t+1 after being stage \(j\) in occasion t and stage \(l\) in occasion t-1 and surviving to and sprouting in occasion t+1, then

\[\begin{equation} \tag{5} a _{DDD} = \sigma _{.DD} (1 - \rho _{.DD}) \end{equation}\]

\[\begin{equation} \tag{6} a _{VDD} = \sigma _{.DD} \rho _{.DD} (1 - \gamma _{.DD}) \end{equation}\]

\[\begin{equation} \tag{7} a _{FDD} = \sigma _{.DD} \rho _{.DD} \gamma _{.DD} \end{equation}\]

In both raw and function-based MPMs, most estimated elements are survival-transition probabilities. In ahMPMs, these give the probability of an individual in stage \(j\) at occasion t surviving and transitioning to stage \(k\) at occasion t+1. Fewer elements are devoted to fecundity, although life history models with more reproductive stages and more recruit stages will have more fecundity elements. In Figure 1.1, fecundity is shown in the top-right of the matrix, as the mean production of seeds either dormant or germinating in the next occasion. Ignoring the fecundity elements, we have a survival-transition matrix (symbolized as either U or T), in which the column sums correspond to the expected survival probabilities of individuals in each stage from occasion t to occasion t+1. Ignoring the survival-transition terms, we have the fecundity matrix (symbolized as F), in which the column sums correspond to the expected overall time-specific fecundity of individuals in these respective stages. The full MPM (symbolized as A) is the matrix sum of the survival-transition matrix and the fecundity matrix.

In principle, everything just noted about function-based ahMPMs also applies to function-based hMPMs. However, there is a key difference in terms of the distribution of elements within the matrix. The inclusion of stage or condition in occasion t-1 increases both the number of survival-transition elements and the number of fecundity elements, and also has the effect of dispersing the locations of these elements across the matrix. Whereas estimated transitions in ahMPMs will generally occur in dense patches of estimated elements, in hMPMs, most elements are structural zeros, with elements occurring either individually surrounded by zeros, or in small patches of estimated elements surrounded by zeros. This makes error-checking more challenging, because the user needs to be aware of where elements are supposed to occur in order to check their values properly.

Different parameterizations of the historical MPM

deVries and Caswell (2018) detail different approaches to the development of hMPMs, differing in how state or stage in occasion t-1 is incorporated into the matrix. Full prior stage dependence models deal with history by incorporating prior condition as the exact stage of an organism in occasion t-1, yielding a matrix showing stage pairs in occasion t-1 and t along the columns of the matrix, and stage pairs in occasion t and t+1 along the rows of the matrix. Prior condition models deal with history by making the transition from stage t to stage t+1 a function of stage at occasion t and condition in occasion t-1. Prior condition can be determined in the same way that current stage is determined (e.g. size classification), or a different measure of condition can be used, such as growth (i.e. the change in size between occasions t-1 and t).

One key feature proposed by deVries and Caswell (2018) is the addition of a new stage to account for the prior status of newborn individuals. This reflects a slightly different interpretation from Ehrlén (2000) of the historical transition. In Ehrlén (2000), all matrix elements simply reflect the order of the events in a single transition, including both fecundity and survival-transition events. However, in deVries and Caswell (2018), these matrix elements must also reflect the history of specific individuals. In the latter case, the fact that a newborn in occasion t did not exist in occasion t-1 leads to the creation of a new prior stage to account for the time immediately prior to birth. This new stage only exists in the immediate prior occasion, and is only used for newborns in the first survival transition from birth. So, for example, in a three stage MPM where the 1st stage is the newborn stage and only the 3rd stage is reproductive, we add a 4th stage to the prior portion of the row and column. Thus, we may start with the following hMPM in Ehrlén (2000) format:

\[\begin{equation} \tag{8} \tiny \left[\begin{array} {rrrrrrrrr} n _{2,AA} \\ n _{2,BA} \\ n _{2,CA} \\ n _{2,AB} \\ n _{2,BB} \\ n _{2,CB} \\ n _{2,AC} \\ n _{2,BC} \\ n _{2,CC} \end{array}\right] = \left[\begin{array} {rrrrrrrrr} S _{AAA} & 0 & 0 & S _{AAB} & 0 & 0 & S _{AAC} & 0 & 0 \\ S _{BAA} & 0 & 0 & S _{BAB} & 0 & 0 & S _{BAC} & 0 & 0 \\ S _{CAA} & 0 & 0 & S _{CAB} & 0 & 0 & S _{CAC} & 0 & 0 \\ 0 & S _{ABA} & 0 & 0 & S _{ABB} & 0 & 0 & S _{ABC} & 0 \\ 0 & S _{BBA} & 0 & 0 & S _{BBB} & 0 & 0 & S _{BBC} & 0 \\ 0 & S _{CBA} & 0 & 0 & S _{CBB} & 0 & 0 & S _{CBC} & 0 \\ 0 & 0 & S _{ACA} + F _{ACA} & 0 & 0 & S _{ACB} + F _{ACB} & 0 & 0 & S _{ACC} + F _{ACC} \\ 0 & 0 & S _{BCA} & 0 & 0 & S _{BCB} & 0 & 0 & S _{BCC} \\ 0 & 0 & S _{CCA} & 0 & 0 & S _{CCB} & 0 & 0 & S _{CCC} \\ \end{array}\right] \left[\begin{array} {rrrrrrrrr} n _{1,AA} \\ n _{1,BA} \\ n _{1,CA} \\ n _{1,AB} \\ n _{1,BB} \\ n _{1,CB} \\ n _{1,AC} \\ n _{1,BC} \\ n _{1,CC} \end{array}\right] \end{equation}\]

This hMPM becomes as follows in deVries and Caswell (2018) format:

\[\begin{equation} \tag{9} \tiny \left[\begin{array} {rrrrrrrrrrrr} n _{2,AA} \\ n _{2,BA} \\ n _{2,CA} \\ n _{2,AB} \\ n _{2,BB} \\ n _{2,CB} \\ n _{2,AC} \\ n _{2,BC} \\ n _{2,CC} \\ n _{2,AP} \\ n _{2,BP} \\ n _{2,CP} \end{array}\right] = \left[\begin{array} {rrrrrrrrrrrr} S _{AAA} & 0 & 0 & S _{AAB} & 0 & 0 & S _{AAC} & 0 & 0 & S _{AA,AP} & 0 & 0 \\ S _{BAA} & 0 & 0 & S _{BAB} & 0 & 0 & S _{BAC} & 0 & 0 & S _{BA,AP} & 0 & 0 \\ S _{CAA} & 0 & 0 & S _{CAB} & 0 & 0 & S _{CAC} & 0 & 0 & S _{CA,AP} & 0 & 0 \\ 0 & S _{ABA} & 0 & 0 & S _{ABB} & 0 & 0 & S _{ABC} & 0 & 0 & 0 & 0 \\ 0 & S _{BBA} & 0 & 0 & S _{BBB} & 0 & 0 & S _{BBC} & 0 & 0 & 0 & 0 \\ 0 & S _{CBA} & 0 & 0 & S _{CBB} & 0 & 0 & S _{CBC} & 0 & 0 & 0 & 0 \\ 0 & 0 & S _{ACA} & 0 & 0 & S _{ACB} & 0 & 0 & S _{ACC} & 0 & 0 & 0 \\ 0 & 0 & S _{BCA} & 0 & 0 & S _{BCB} & 0 & 0 & S _{BCC} & 0 & 0 & 0 \\ 0 & 0 & S _{CCA} & 0 & 0 & S _{CCB} & 0 & 0 & S _{CCC} & 0 & 0 & 0 \\ 0 & 0 & F _{AP,CA} & 0 & 0 & F _{AP,CB} & 0 & 0 & F _{AP,CC} & 0 & 0 & 0\\ 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 \\ \end{array}\right] \left[\begin{array} {rrrrrrrrrrrr} n _{1,AA} \\ n _{1,BA} \\ n _{1,CA} \\ n _{1,AB} \\ n _{1,BB} \\ n _{1,CB} \\ n _{1,AC} \\ n _{1,BC} \\ n _{1,CC} \\ n _{1,AP} \\ n _{1,BP} \\ n _{1,CP} \end{array}\right] \end{equation}\]

Note that matrix 9 above can be reduced by two rows and two columns, since transitions from the newborn prior stage (P) can only be to the newborn stage (A).

Package lefko3 generally implements the full prior stage dependence model approach, particularly in the development of raw matrices. However, in principle, function-based matrices developed with lefko3 can be seen as falling within the prior condition model approach where prior condition is determined in the same way as current stage. We also implement both the Ehrlén (2000) format and the deVries and Caswell (2018) format, and use the former as the default. We leave it to the user to decide which approach to use.

deVries and Caswell (2018) also suggest that hMPMs can be organized differently to yield more intuitive models. In particular, matrices may be as organized as block matrices where the component blocks are essentially matrices showing the transitions from all stages in occasion t to stages in occasion t+1 conditioned on individuals having been in the same stage in occasion t-1. We refer to these block component matrices as conditional matrices, since they show transitions from occasion t to occasion t+1 conditional on the same previous stage in occasion t-1. We have developed function cond_hmpm() to take full hMPMs and decompose them into their associated conditional matrices.

Leslie (age-classified) MPMs

Some population biologists working with lefko3 may wish to produce Leslie matrices, which classify an organism only by age. A Leslie matrix has the following general form

\[\begin{equation} \tag{10} \tiny \left[\begin{array} {rrrrrrr} n _{2, 0} \\ n _{2, 1} \\ n _{2, 2} \\ n _{2, 3} \\ \vdots \\ n _{2, a-1} \\ n _{2, a} \end{array}\right] = \left[\begin{array} {rrrrrrr} 0 & F _1 & F _2 & F _3 & \cdots & F _{a-1} & F _a \\ S _{1,0} & 0 & 0 & 0 & \cdots & 0 & 0 \\ 0 & S _{2,1} & 0 & 0 & \cdots & 0 & 0 \\ 0 & 0 & S _{3,2} & 0 & \cdots & 0 & 0 \\ \vdots & & & & & & \vdots \\ 0 & 0 & 0 & 0 & \cdots & 0 & S _{5+B,4C} \\ 0 & 0 & 0 & 0 & \cdots & S _{a,a-1} & S _{>a,a} \\ \end{array}\right] \left[\begin{array} {rrrrrrr} n _{1, 0} \\ n _{1, 1} \\ n _{1, 2} \\ n _{1, 3} \\ \vdots \\ n _{1, a-1} \\ n _{1, a} \end{array}\right] \end{equation}\]

Here, \(n _{2, 0}\) refers to the number of newborn (age = 0) individuals in time 2, \(a\) is the final age in the model, \(S _{1, 0}\) is the survival probability of a newborn individual (age = 0) to the next age, \(F _1\) is the fecundity of an individual in age 1, and \(S _{>a, a}\) is the survival of individuals in the final modeled age to the next age (and later). Note that in Leslie models, survival transitions are always just below the diagonal or in the final lower-right element of the diagonal, and fecundity transitions are always in the top row. Note also that age-classified models are inherently ahistorical, and so no historical models are possible. Package lefko3 estimates both raw and function-based forms of these.

Age-by-stage MPMs

Package lefko3 can also handle the estimation and analysis of age-by-stage MPMs. These matrices incorporate both stages (whether size-classified or not), as well as the ages in which they occur. For example, in a three stage life history with a single newborn stage and two adult stages, only one of which is reproductive (as in equations 1, 4, 8, and 9), and in which age impacts survival and fecundity only for the first 4 years, beyond which survival and fecundity transitions remain the same, we have the following ahistorical age-by-stage matrix.

\[\begin{equation} \tag{11} \tiny \left[\begin{array} {rrrrrrr} n _{2,1A} \\ n _{2,2B} \\ n _{2,2C} \\ n _{2,3B} \\ n _{2,3C} \\ n _{2,4B} \\ n _{2,4C} \end{array}\right] = \left[\begin{array} {rrrrrrr} 0 & 0 & F _{1A,2C} & 0 & F _{1A,3C} & 0 & F _{1A,4+C} \\ S _{2B,1A} & 0 & 0 & 0 & 0 & 0 & 0 \\ S _{2C,1A} & 0 & 0 & 0 & 0 & 0 & 0 \\ 0 & S _{3B,2B} & S _{3B,2C} & 0 & 0 & 0 & 0 \\ 0 & S _{3C,2B} & S _{3C,2C} & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & S _{4B,3B} & S _{4B,3C} & S _{5+B,4B} & S _{5+B,4C} \\ 0 & 0 & 0 & S _{4C,3B} & S _{4C,3C} & S _{5+C,4B} & S _{5+C,4C} \\ \end{array}\right] \left[\begin{array} {rrrrrrr} n _{1,1A} \\ n _{1,2B} \\ n _{1,2C} \\ n _{1,3B} \\ n _{1,3C} \\ n _{1,4B} \\ n _{1,4C} \end{array}\right] \end{equation}\]

The above matrix is ahistorical. Package lefko3 does not currently support historical age-by-stage matrices, although they are certainly possible.

Step 1: Life history model development

The basic workflow to analysis with package lefko3 starts with the development of a life history model that encapsulates all of the appropriate life stages relevant to population dynamics. We do not present a complete discussion on this step, instead focusing on a sketch of the process focused on the life cycle graph and noting key issues related to this package. We encourage users to explore the literature on this subject, but particularly note chapters 3 and 4 in Caswell (2001) for a good treatment useful for beginners. Stages need to be defined carefully, and should strongly account for variability in vital rates. Statistical approaches such as Jenks natural breaks optimization can help determine ideal “natural” breaks in the distribution of size data to act as borders between size-classified stages in raw MPMs (Jenks 1967). In contrast, stages within function-based MPMs are more straightforward to define, with regular breaks across the size spectrum. We also note Kendall et al. (2019) as a good reference detailing common problems in MPM construction and how to avoid them through proper development and operationalization of life history models. Beissinger and Westphal (1998), Wardle (1998), and Salguero-Gómez and Casper (2010) provide good discussions of the proper application of life history models to understand population dynamics through the MPM approach.

Here we utilize a life cycle graph approach to build a life history model. A life cycle graph shows the life history of an organism as a series of nodes and arrows. The nodes represent unique stages that the individual may go through during development, and individuals are noted as occurring in these stages during monitoring sessions conducted over a roughly or strictly regular frequency, such as at the start of the growing season every year, or over specific dates each year. Arrows represent transitions between stages across consecutive occasions. These may be interpreted either as probabilities of survival when reflecting the individual’s stage across time, or as rates when reflecting the production of offspring. A good life cycle graph, and in general a good life history model, must explicitly include representations of all stages possible for the organism to enter, and all biologically plausible transitions between these transitions. Figure 1a shows an example of a life cycle graph.

The construction of a good life history model is not as easy as it might appear, particularly because it can be influenced by factors seemingly external to the life history of the organism. Some of the most important considerations outside of the species’ biology include the size of the dataset, and the decision of whether to create a raw MPM or a function-based MPM. All else being equal, a larger dataset and a function-based MPM will allow more stages to be used in the life history. Assuming a dataset of fixed size, raw MPMs will include more and more zeros as the number of stages in the life history model increases. This happens because the chance of having any individuals actually move through a specific transition decreases as the number of possible transitions increases. These functional zeros that become increasingly common with increasing stages can cause problems in analysis, because they suggest that some transitions are impossible when, in fact, individuals moving through them were missing just by chance. Even a transition with extremely high probability may be missing in some years just by chance. One impact of this would be the reduction of the mean transition within an element-wise mean matrix to an unrealistic level, causing the predicted population growth rate to be artificially low.

Function-based MPMs are better able to handle large numbers of matrix elements because the risk of overparameterization is reduced by parsimonious model selection when vital rate models are determined. However, the size of the dataset influences the statistical power of these vital rate models, with smaller datasets yielding larger error associated with matrix elements and hence a loss of variability with potentially important factors. Loss of statistical power in vital rate models can lead to the loss of important process variance, and can make the population appear more static than it really is. Further, developing function-based MPMs for life history models that include stages rarely or never actually observed can yield problematic inferences, such as matrices suggesting that some stages have survival probabilities greater than 1.0. Chapter 6 in Morris and Doak (2002) provides a good description of techniques that may be used to define stages and to determine the exact number to use given the context imposed by a given dataset of a given size. Ellner and Rees (2006) and Doak et al. (2021) provide some discussion of this issue within the context of integral projection model development.

Once a life history model is developed, we need to characterize the main life stages in a way that is relevant to the dataset. We do this with the sf_create() function, which creates a stageframe object. This term is a combination of the terms life history stage and data frame, and the object itself is a data frame that describes all of the life history stages. This object is created in a way that shows how stage relates to size, reproductive status, observation status, propagule status, maturity status, entry status (i.e. a stage’s ability to serve as the first stage of an individual’s life), and presence in the dataset, and in which the description of each life stage is unique. A good stageframe describes stages in ways that matrix-estimating functions utilize to compute elements accurately, and also allows the user to stipulate extra descriptive information on each stage as text. If the user wishes to create an IPM or a function-based MPM with many stages, then this function also allows stage definition to be automated.

Step 2a: Dataset organization

Once the stageframe has been created, the demographic data needs to be organized into a format that lefko3 can use. The proper format is one that we term historically-formatted vertical format, or hfv format for short. We have developed two functions for this purpose, depending on the original format of the data. If the data is arranged horizontally, meaning that individual life histories are recorded in a spreadsheet in which each unique individual’s data is organized within a single row, where columns correspond to descriptor variables and to condition at different times, then the verticalize3() function can standardize this dataset into the proper format. If the dataset is in vertical, ahistorical format, in which an individual’s condition across time is recorded across rows in a spreadsheet, with a single row corresponding to either a single observation or to a pair of consecutive observations, then the historicalize3() function can standardize the dataset properly. These functions both can also add some new variables that might be of use. For example, both functions can estimate radial density if Cartesian coordinates for each datum and a radius are provided. Both functions are powered by binaries built in C++ using single control loops to propagate each data frame properly and efficiently, and so run very quickly (typically under 1s on a 2019 MacBook Pro). The case studies included in lefko3 illustrate the usage of these functions on real data. The function summary_hfv() can be used to provide quick details about the resulting standardized datasets.

Step 2b: Provide supplemental information for matrix estimation

MPMs are often estimated only partially from available demographic datasets. Some transitions are parameterized using information gathered from other studies, whether through direct input in the matrix or through the development of kernels contingent on external information. Other transitions might also be estimated via proxy transitions elsewhere in the matrix. In lefko3, this information can be provided in one of two ways. The preferred, and most recently developed, method is through the supplement table, which can be developed using the supplemental() function. This function allows users to create a data frame detailing:

1. specific transitions to set as the main fecundity transitions;
2. specific transitions to set as constants;
3. specific transitions to estimate via proxy transitions;
4. specific multipliers for fecundity in cases in which fecundity estimates resulting from linear modeling must be modified to characterize the full transition, or for transitions estimated via proxy; and
5. specific multipliers for survival in cases where survival is incorporated by proxy and must be set at a reduced or elevated level relative to the original, directly estimated transition.

Examples might illustrate where this approach is useful. If I lack my own data on subterranean juvenile stages in a plant species, but I have estimates of survival for those stages form another study, then I might use those estimates as constants in the MPM. I can also set some transitions explicitly to 0 if I believe that there is a biological need for such an override. Further, if I lack demographic data on the development of germinated seeds to the seedling or earliest adult stage, but I have reason to believe that the survival probabilities should be similar to the survival within an observed stage of seedlings or small adults, then I can use the latter survival-transitions as proxies (or even decrease them via a multiplier). Finally, if fecundity is a function of seed production, survival to the next year, and germination probability, then germination probability might be estimated via a separate field germination study. I might wish to incorporate this germination probability both as a constant transition, and as a multiplier on estimated fecundity. Supplement tables provide the means to include all of this information.

Step 3: Assess whether historical MPM is justified, and develop models of demographic parameters

Historical MPMs are not necessarily justified in all cases. We urge the reader to use the principle of parsimony in deciding this. For example, users may analyze whether lagged effects of previous stage appear to influence vital rates. Package lefko3 includes one method to do this based on linear modeling. A number of other methods exist, mostly focused on what are known as memory models (Brownie et al. 1993; Pradel, Wintrebert, and Gimenez 2003; Cole et al. 2014). Here, we focus only on the main lefko3 method, and leave it to the reader to explore other options.

In lefko3, function modelsearch() allows users to explore whether history influences component vital rates, and to develop linear models of these vital rates. The results can be used to decide not only whether a historical MPM is justified, but also to develop function-based hMPMs and ahMPMs themselves. Package lefko3 can estimate linear models to estimate up to fourteen different vital rates:

1. Survival probability - This is the probability of surviving from occasion t to occasion t+1, given that the individual is in stage \(j\) in occasion t (and, if historical, in stage \(l\) in occasion t-1). In lefko3, this parameter may be modeled as a function of up to three size metrics, reproductive status, patch, year, age, and a number of individual or environmental covariates in occasions t and t-1, and individual identity. This parameter is required in all function-based matrices.

2. Observation probability - This is an optional parameter denoting the probability of observation in occasion t+1 of an individual in stage \(k\) given survival from occasion t to occasion t+1. This parameter is only used when at least one stage is not observable. For example, some plants are capable of vegetative dormancy, in which case they are alive but do not necessarily sprout in all years in which they are in this stage. In these cases, the probability of sprouting may be estimated as the observation probability, and its complement is the probability of becoming dormant assuming survival. Note that this probability does not refer to observer effort, and so should only be used to differentiate completely unobservable stages where the observation status refers to an important biological phenomenon, such as when individuals may be alive but have a size of 0. In lefko3, this parameter may be modeled as a function of up to three size metrics, reproductive status, patch, year, age, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

3. Primary size transition probability - This is the probability of becoming size \(k\) in occasion t+1 assuming survival from occasion t to occasion t+1 and observation in that time. In lefko3, this parameter may be modeled as a function of up to three size metrics, reproductive status, patch, year, age, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

4. Secondary size transition probability - This is the probability of becoming size \(k\) in occasion t+1 assuming survival from occasion t to occasion t+1 and observation in that time, within a second size metric used for classification in addition to the primary metric. In lefko3, this parameter may be modeled as a function of up to three size metrics, reproductive status, patch, year, age, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

5. Tertiary size transition probability - This is the probability of becoming size \(k\) in occasion t+1 assuming survival from occasion t to occasion t+1 and observation in that time, within a third size metric used for classification in addition to the primary and secondary metrics. In lefko3, this parameter may be modeled as a function of up to three size metrics, reproductive status, patch, year, age, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

6. Reproduction probability - This is an optional parameter denoting the probability of reproducing in occasion t+1 given survival from occasion t to occasion t+1, and observation in that time. Note that this should be used only if the researcher wishes to separate breeding from non-breeding mature stages. If all adult stages are potentially reproductive and no separation of reproducing from non-reproducing adults is desired, then this parameter should not be estimated. In lefko3, this parameter may be modeled as a function of up to three size metrics, reproductive status, patch, year, age, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

7. Fecundity rate - Under the default setting, this is the rate of successful production of offspring in occasion t by individuals alive, observable, and reproductive in that time, and, if desired and sufficient information is provided in the dataset, the survival of those offspring into occasion t+1 in whatever juvenile class is possible. Thus, the fecundity rate of seed-producing plants might be split into seedlings, which are plants that germinated within a year of seed production, and dormant seeds. Alternatively, it may be given only as produced fruits or seeds, with the survival and germination of seeds provided elsewhere in the MPM development process, such as within a supplement table. An additional setting allows fecundity rate to be estimated using data provided for occasion t+1 instead of occasion t. In lefko3, this parameter may be modeled as a function of up to three size metrics, reproductive status, patch, year, age, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

8. Juvenile survival probability - This is an optional parameter that is used to model the probability of surviving from juvenile stage \(j\) in occasion t to occasion t+1. It is used only when the user wishes to model juvenile vital rates separately from adults, assuming different relationships with explanatory variables than those used to classify adults. In lefko3, this parameter may be modeled as a function of up to three size metrics, patch, year, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

9. Juvenile observation probability - This is an optional parameter denoting the probability of observation in occasion t+1 of an individual in mature stage \(k\) given survival from a juvenile stage in occasion t to occasion t+1. It is used only when the user wishes to model juvenile vital rates separately from adults, assuming different relationships with explanatory variables than those used to classify adults. In lefko3, this parameter may be modeled as a function of up to three size metrics, patch, year, and a number of individual or environmental covariates in occasions t and t-1, and individual identity, and all other caveats noted in (2) above apply.

10. Juvenile primary size transition probability - This is an optional parameter denoting the probability of becoming mature size \(k\) in occasion t+1 assuming survival from juvenile stage \(j\) in occasion t to occasion t+1 and observation in that time. It is used only when the user wishes to model juvenile vital rates separately from adults, assuming different relationships with explanatory variables than those used to classify adults. In lefko3, this parameter may be modeled as a function of up to three size metrics, patch, year, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

11. Juvenile secondary size transition probability - This is an optional parameter denoting the probability of becoming mature size \(k\) in occasion t+1 assuming survival from juvenile stage \(j\) in occasion t to occasion t+1 and observation in that time, in a secondary size metric in addition to the primary size metric. It is used only when the user wishes to model juvenile vital rates separately from adults, assuming different relationships with explanatory variables than those used to classify adults. In lefko3, this parameter may be modeled as a function of up to three size metrics, patch, year, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

12. Juvenile tertiary size transition probability - This is an optional parameter denoting the probability of becoming mature size \(k\) in occasion t+1 assuming survival from juvenile stage \(j\) in occasion t to occasion t+1 and observation in that time, in a tertiary size metric in addition to the primary and secondary size metrics. It is used only when the user wishes to model juvenile vital rates separately from adults, assuming different relationships with explanatory variables than those used to classify adults. In lefko3, this parameter may be modeled as a function of up to three size metrics, patch, year, and a number of individual or environmental covariates in occasions t and t-1, and individual identity.

13. Juvenile reproduction probability - This is an optional parameter denoting the probability of reproducing in mature stage \(k\) in occasion t+1 given survival from juvenile stage j in occasion t to occasion t+1, and observation in that time. It is used only when the user wishes to model juvenile vital rates separately from adults, assuming different relationships with explanatory variables than those used to classify adults. In lefko3, this parameter may be modeled as a function of up to three size metrics, patch, year, and a number of individual or environmental covariates in occasions t and t-1, and individual identity, and all other caveats in (4) apply.

14. Juvenile maturity probability - This is an optional parameter denoting the probability of becoming mature in occasion t+1 given survival from juvenile stage j in occasion t to occasion t+1. This is a different parameter than (13) above and is particularly used to weight transition probabilities to juvenile vs. mature stages properly in matrices with defined juvenile stages. It is used only when the user wishes to model juvenile vital rates separately from adults, assuming different relationships with explanatory variables than those used to classify adults. In lefko3, this parameter may be modeled as a function of up to three size metrics, patch, year, and a number of individual or environmental covariates in occasions t and t-1, and individual identity, and all other caveats in (1) apply.

Of these fourteen vital rates, most users will estimate at least parameters (1) survival probability, (3) size transition probability, and (7) fecundity. These three are the default set for function modelsearch(). Parameters (2) observation probability and (6) reproduction probability may be used when some stages are included that are completely unobservable (and so do not have any size), or that are mature but non-reproductive, respectively. Parameters (8) through (14) should only be added if the dataset contains juvenile individuals transitioning to maturity, and these juveniles live essentially as a single stage before transitioning to maturity, or before transitioning to a stage that is size-classified in the same manner as adult stages are.

Function modelsearch() handles the entire modeling process using an exhaustive model building process combined with information theoretical model selection using model AICc and the number of estimated parameters in each model. It handles the development of global models, exhaustive model building, and the selection of best-fit models. Users should provide this function with information about the following:

1. Individual history - Are the matrices to be built historical or ahistorical? If the former, then the state of the individual in occasion t-1 will be included in modeling.

2. Modeling approach - Should the models be estimated as generalized linear models (GLMs) or mixed linear models? While most function-based matrix models are estimated as the former, the latter approach can account for repeated observations of the same individual by including individual identity as a random factor. Mixed models also allow time and patch to be treated as random variables, which allows for broader and more theoretically sound inference.

3. Suite of factors - Should both size and reproductive status be tested as causal factors? Should two-way interactions be included? Alternatively, should models be estimated as constants?

4. Suite of vital rates - Which adult demographic parameters should be estimated? The defaults are (1) survival, (3) primary size, and (7) fecundity. Should (2) observation status, (6) reproductive status, or (4) secondary size or (5) tertiary size also be modeled?

5. Juvenile vital rate estimation - Should juvenile parameters (8) through (14) also be modeled separately from adult parameters?

6. Best-fit criterion - If a model with fewer parameters exists within 2.0 AICc units of the model with the lowest AICc, then should this model be used as the best-fit model (the default), or should the model with the lowest AICc always be chosen?

7. Size distribution - Should size be modeled as a continuous variable under a Gaussian or Gamma distribution, or as a count variable under either a Poisson or negative binomial distribution? If a count variable, then should the distribution be zero-inflated to account for excess zeros, zero-truncated to account for a lack of zeros, or left unaltered?

8. Fecundity distribution - Should fecundity be modeled as a continuous variable under a Gaussian or Gamma distribution, or as a count variable under either a Poisson or negative binomial distribution? If a count variable, then should the distribution be zero-inflated to account for excess zeros, zero-truncated to account for a lack of zeros, or left unaltered?

9. Continuous distribution estimation method - If using a Gaussian or Gamma distribution for size, then should the probability of transition be estimated via the cumulative density function (CDF) method (the default), or the midpoint method? See Doak et al. (2021) for a discussion of the relative merits of both.

10. Timing of fecundity - Function modelsearch() assumes that linear models of fecundity use a metric counted or measured in occasion t as the response. This applies well with most herbaceous plant datasets, where flowers or seeds produced in one year might be the fecundity response measured. However, users not wishing to follow this default behavior can use the fectime option to stipulate a fecundity metric measured in occasion t+1.

11. Age - Is an age or age x stage MPM the main goal? Currently only age MPMs and ahistorical age x stage MPMs are offered in lefko3.

12. Individual covariates and environmental state variables - Should individual or environmental covariates be tested as causal factors on vital rates? If so, then should they be included as fixed, quantitative terms or as random, categorical terms?

13. Stage groups - If stage groups are noted in the stageframe, then should they also be used as fixed, independent categorical predictors in modeling?

14. Missing values for occasions and patches - Should occasions or patches with coefficients that drop to 0 in modeling be estimated as random draws from the corresponding distributions of occasion or patch coefficients?

15. Censoring - Should data points marked as questionable be used or eliminated?

16. Variable names - The names of all relevant variables in the dataset need to be specified. Note that the default behavior assumes variable names output via the historicalize3() or verticalize3() functions, which produce standardized historically-formatted vertical (hfv format) datasets.

Once all decisions are made and associated input terms are provided, modelsearch() goes to work. The result is a lefkoMod object, which is a list in which the first 14 elements are the best-fit models developed for each vital rate. These are followed by an equivalent number of elements showing the full model tables developed and tested, followed by a table detailing the names and definitions of terms used in modeling, an element detailing the best-fit criterion used, and ending on quality control data showing the number of individuals and the number of unique transitions used in the estimation of each model, as well as the overall accuracy of the models. Depending on user choices, linear modeling is handled through the lm() and glm() functions in the stats package, the glm.nb() function in the MASS package, the lmer() and glmer() functions in lme4 (Bates et al. 2015), the glmmTMB() function in glmmTMB (Brooks et al. 2017), the glm.nb() function in package MASS, the vglm() function in package VGAM (Yee and Wild 1996; Yee 2015), or the zeroinfl() function in package pscl (Zeileis, Kleiber, and Jackman 2008). Exhaustive model building proceeds through the dredge() function in package MuMIn (Bartoń 2014). Model selection is handled through assessment of AICc and the number of parameters estimated per model (see 6. Best-fit criterion above).

If modelsearch() is set for historical analysis (historical = TRUE, the default), then the decision of whether to develop a historical MPM can be made on the basis of whether any best-fit vital rate model includes size or reproductive status in occasion t-1. If at least one vital rate does, then a historical MPM is justified. Otherwise, it is not. Regardless, the output can be used to create a function-based MPM in the next step.

Advanced users of lefko3 may wish to create their own models without the package’s automated model selection function. In that case, lefko3’s matrix functions can accommodate single models developed using the functions and packages mentioned before.

Step 4: Estimate matrices

MPM creation can be accomplished with nine different functions: rlefko2() for raw ahistorical stage-classified MPMs, rlefko3() for raw historical stage-classified MPMs, arlefko2() for raw ahistorical age-by-stage MPMs, rleslie() for raw age-classified MPMs, flefko2() for function-based ahistorical MPMs and IPMs, flefko3() for function-based historical MPMs and IPMs, aflefko2() for function-based ahistorical age-by-stage MPMs, fleslie() for function-based age-classified MPMs, and mpm_create() as a general, all-purpose MPM and IPM creation function. These functions incorporate binary kernels developed to handle the estimation of matrix elements quickly and efficiently. A single run of flefko3(), for example, should be able to yield all annual matrices for all patches for the Cypripedium candidum dataset provided with lefko3 in under a half-minute on most machines (14s or so on RPS’ 2019 MacBook Pro with 2.3 GHz 8-Core Intel Core i9). Parallel computing should not be necessary even with the slowest of current machines, provided that the machine is current enough to handle at least R 3.6.3.

The output for each of these functions is a lefkoMat object, which is an S3 object (i.e. a list with pre-defined elements). These lists include elements A, U, and F, which are themselves lists of complete projection matrices, survival-transition matrices, and fecundity matrices, respectively. For example, code such as matobject$A[[1]] would access the first complete projection matrix in a lefkoMat object named matobject. They are followed by elements referred to as ahstages, hstages, and agestages, which provide data frames describing the stages (technically showing the stageframe, though edited by the function for consistency), the historical stage-pairs, and the age-stage pairs shown in the order in which they occur within the matrices. The labels element is a data frame giving a description of each matrix in the order in which it occurs within the A, U, and F elements, including the population, patch, and monitoring time designations. The final elements are quality control outputs that vary in content depending on whether the output matrices are raw or function-based, but nonetheless always include at least the numbers of individuals and individual-transitions used for estimation.

Users wishing to check the output MPMs for errors or simply understand more about them may utilize functions summary() and cond_hmpm(). Function summary() summarizes each lefkoMat object used as input, and also checks the survival of stages, stage-pairs, or age-stages by assessing the column sums for each U matrix and providing warnings if any survival probabilities fall below 0 or are greater than 1. Function cond_hmpm() decomposes hMPMs into MPMs showing transitions from occasion t to occasion t+1, but conditioned on the same stage at occasion t-1. Thus, a single hMPM with five stages and 25 stage pairs would be broken down into five conditional MPMs, one for each stage at occasion t-1, with five columns and five rows denoting stage at occasions t and t+1, respectively. These can be examined individually, and the survival of stages from occasion t to occasion t+1 can be assessed as a function of stage in occasion t-1 by taking the associated column sums of these conditional matrices.

Step 4a. Importing matrices and IPMs

Some population ecologists will wish to utilize the power and functionality of lefko3 on already existing matrices. Although many analytical functions work with simple lists of matrices, users may import sets of matrices as lefkoMat objects in order to utilize the most powerful analyses. The create_lM() function allows users to take a list of square matrices of equal dimensions, and import them into a lefkoMat object. Users wishing to do this will also need to develop a stageframe, and to input the order of populations, patches, and years associated with the order of matrices in the input list. Function create_lM() runs several quality checks on the input data, and assuming that there are no obvious inconsistencies, yields the final lefkoMat object for further use in analysis.

Users may also import IPMs. If the characteristics of the kernels propagating an IPM are properly described in a publication, and the kernel is composed of generalized linear models or generalized linear mixed models, then function vrm_import() allows this information to be input into lefko3 and used to recreate the IPMs in discretized form. Please see lefko3: a gentle introduction for more information, or see the function example.

Step 5. MPM analyses

Package lefko3 includes a number of functions to aid analysis once matrices are created. These may be of greater utility in some circumstances than established functions such as eigen(), because our functions are made to handle even extremely large, sparse matrices. Currently, we include functions to estimate element-wise arithmetic mean matrices, discrete and stochastic population growth rate, stable and long-run stage structure, reproductive value, deterministic and stochastic sensitivity and elasticity, and deterministic and stochastic life table response experiments (LTRE and sLTRE). We also include a basic projection function that can work under deterministic, stochastic, and density dependent assumptions. Plans are in the works for further analysis functions in the future.